TM 5-3805-261-34
REAR AXLE MAINTENANCE. (cont)
14-18. Differential Carrier. (Sheet 4 of 7)
DISASSEMBLY (cont)
8.
Remove cup (13) and seal (14)
from carrier (31, Figure 14-140).
Discard seal (14).
NOTE
Do not remove cone bearing
without the proper tools to
prevent damage to bearing.
9.
Remove cone bearing (15) and cup
(16).
10. Remove and discard preformed
packing (17).
11. Remove seal (18) and ring (19).
Discard seal (18).
12. Remove two bolts (20), locks (21)
and plate (22) from carrier (31,
Figure 14-141).
13. Remove two sleeves (23).
14. Remove ten studs (24).
15. Remove four studs (25) and
ferrules (26).
16. Remove plug (27) and preformed
packing (28, Figure 14-142).
Discard preformed packing (28).
17. Remove plug (29) and gasket (30)
from carrier (31). Discard
gasket (30). Remove all gasket
material from mounting surfaces.
CLEANING
Clean all parts. Refer to Chapter 2.
Figure 14-140.
Figure 14-141.
Figure 14-142.
Go to Sheet 5
14-104
