TM 5-3805-261-34
REAR AXLE MAINTENANCE. (cont)
14-17. Differential Assembly. (Sheet 4 of 12)
DISASSEMBLY (cont)
NOTE
Position items 8 thru 43 as an
assembly with ring gear teeth facing up.
1.
Remove nut (8) and items 9 and 10 as an
assembly (Figure 14-122).
2.
Remove cup (9) from cage (10, Figure 14-123).
NOTE
Do not remove cone bearings without the proper tools
to
prevent damage to bearings. Do not perform following
step unless inspection
calls for replacement.
3.
Using puller attachment, puller group, two legs, step
late. Four plates, two nuts and pump group remove
cone bearing (11 Figure 14-124).
4.
Remove six dowels (12) from housing 915).
5.
Remove eight bolts (13), washers (14) and housing
(15).
6.
Remove washer (16) and gear (17).
7.
Remove items 18 thru 21 as an assembly.
Go to Sheet 5
14-92
