TM 5-3805-261-34
ENGINE MAINTENANCE.
3-4.
Engine. (Sheet 7 of 13)
REMOVAL
WARNING
Weight of engine is
approximately 1500 pounds.
Use adequate hoist and sling
for lifting. Failure to
follow this procedure may
cause INJURY. If you are
injured, seek medical aid
immediately.
37.
Attach hoist and sling to both
lifting eyes mounted on each end
of cylinder head and take up
slack.
38.
Remove four bolts (62) and lock
washers (63) from trunnion on
lower front, left and right sides
of engine and separate.
CAUTION
Clear all hose, cable, wires
and other detached assemblies
from engine area before
lifting engine from frame.
39.
Remove engine. Lift engine
slowly, always checking to be
sure cables and hoses are not
caught on anything. Do not allow
engine to swing.
40.
Support on engine stand or
suitable blocking.
NOTE
If engine supports interferes
with mounting, refer to
paragraph 3-5, steps 3
through 6 for removal.
41.
Remove hoist and sling.
Go to Sheet 8
3-23
