TM 5-3805-261-34
ENGINE MAINTENANCE.
3-4.
Engine. (Sheet 3 of 13)
REMOVAL
WARNING
Articulation anti-pivot pin
must be installed during
maintenance procedure.
1.
Turn fuel shutoff valve clockwise
on right front of fuel tank to
shut off fuel (Figure 3-3).
2.
Remove nut (1, Figure 3-4) from
rear, right side of solenoid.
NOTE
All
wire,
cable
and
harness
assemblies
must be tagged before
disconnecting to aid in
installation.
3.
Disconnect wire assembly (2) at
terminal from solenoid.
4.
Remove nut (3) and lockwasher
(4).
5.
Disconnect wire assembly (5) and
cable assemblies (6 and 7) from
"battery" terminal of solenoid.
6.
Remove nut (8) and lockwasher
(9).
7.
Disconnect cable assembly (10)
from starting motor and slave
receptacle.
8.
Remove lockwasher (11).
9.
Disconnect cable assemblies (12
and 13) from starting motor.
Figure 3-4.
Go to Sheet 4
3-19
Figure 3-3.
