TM 5-3805-261-34
ENGINE MAINTENANCE. (cont)
13-9.
Camshaft. (Sheet 5 of 5)
INSTALLATION (cont)
12. Install four bolts (1, Figure
13-53) and tighten to 41 ft-lb
torque.
NOTE
If bolts cannot be
installed in end of
camshaft, remove camshaft
gear again. Check engine
timing to make sure timing
is correct. Refer to
paragraph 3-7.
Return 130G Grader to
original equipment
condition.
End of Task
13-56
Figure 13-