TM 5-380-261-34
ENGINE MAINTENANCE.
13-9.
Camshaft. (Sheet 4 of 5)
INSTALLATION
CAUTION
Use extreme care when
installing camshaft. Avoid
any movement that could
scratch or damage camshaft
bearings. Failure to use
proper care will result in
damage to camshaft sealings.
4.
Using 3/8-16NC forged eyebolt and
crowbar, install camshaft (6).
5.
Remove 3/8-16NC forged eyebolt.
6.
Install thrust plate (5, Figure
13-53).
7.
Install two locks (4).
8.
Install two bolts (3).
9.
Turn camshaft (6, Figure 13-54)
so end notch is up.
10. Bend two locks (4) to lock bolts
(3, Figure 13-53).
11. Position camshaft gear (2) on
camshaft (6, Figure 13-52) so
that "C" mark is alined with "C"
mark on crankshaft.
Go to Sheet 5
13-55
Figure 13-53.
Figure 13-52.