TM 5-3805-261-34
ENGINE MAINTENANCE. (cont)
13-6.
Balancer Shaft Assembly and Bearings.
REMOVAL
1.
Remove four bolts (1), two thrust
plates (2) and four washers (3,
Figure 13-32) from front engine
block.
2.
Remove items 4 thru 6 as an
assembly (Figure 13-33). Mark
two balancer shafts (4) to make
sure they are installed in their
original place.
3.
Remove two gears (5) and keys (6)
from balancer shafts (4, Figure
13-34).
4.
Using camshaft bearing tool group
and ratchet box wrench, remove
two bearings (7) and bearing
sleeves (8 and 9, Figure 13-35).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter
2.
Go to Sheet 3
13-34
Figure 13-32.
Figure 13-33.
Figure 13-35.
Figure 13-34.
