EARTHMOVING EQUIPMENT COMPONENTS MAINTENANCE. (cont.)

EARTHMOVING EQUIPMENT COMPONENTS MAINTENANCE. (cont.) - TM-5-3805-261-34_791

EARTHMOVING EQUIPMENT COMPONENTS MAINTENANCE. (cont.) - TM-5-3805-261-34_793

TM-5-3805-261-34 Grader Heavy Road Motorized (Caterpillar Model 130 G) Manual
Page Navigation
745

TM 5-3805-261-34 EARTHMOVING EQUIPMENT COMPONENTS MAINTENANCE. (cont.) 12-3. Blade Lift Bar Assembly. (Sheet 3 of 6) REMOVAL (cont.) 7. Remove two bolts (20), washers (21) and lock (22, Figure 12-8) from right side of blade lift arm. 8. Remove pin (23) and two washers (24, 25 and 26). 9. Remove items 27 thru 34 as an assembly (Figure 12-9). 10. Remove hoist and sling. DISASSEMBLY 1. Using a suitable puller, remove and discard eight seals (27) and four bearings (28, Figure 12-10). 2.Using a suitable puller, remove seal (29), ring (30), bearing (31), spacer (32) and bearing (33) from blade lift bar (34). Discard seal (29) and bearings (31 and 33). CLEANING Clean all parts. Refer to Chapter 2. INSPECTION Inspect all parts. Refer to Chapter 2. Figure 12-8. Figure 12-9. Figure 12-10. Go to Sheet 4 12-10

Privacy Statement
Press Release
Contact