EARTHMOVING EQUIPMENT COMPONENTS MAINTENANCE. (cont.)

EARTHMOVING EQUIPMENT COMPONENTS MAINTENANCE. (cont.) - TM-5-3805-261-34_796

EARTHMOVING EQUIPMENT COMPONENTS MAINTENANCE. (cont.) - TM-5-3805-261-34_798

TM-5-3805-261-34 Grader Heavy Road Motorized (Caterpillar Model 130 G) Manual
Page Navigation
750

TM 5-3805-261-34 EARTHMOVING EQUIPMENT COMPONENTS MAINTENANCE. 12-4. Blade Lift Arm. (Sheet 2 of 5) REMOVAL WARNING Weight of arm is approximate- ly 200 lbs. Use adequate hoist and sling for lifting. Failure to follow this procedure may cause INJURY. If you are injured, seek medical aid immediately. NOTE The following is a mainte- nance procedure for the right side blade lift arm. The maintenance procedure for the left side blade lift arm is identical, except as noted. 1. Attach hoist and sling to blade lift arm (25, Figure 12-11) in center of vehicle frame. 2. Remove two bolts (1), washers (2) and lock (3). 3. Remove bolt (4), washer (5) and plate (6) on right side blade lift arm (25) only. 4. Remove pin (7), four washers (8), two washers (9) and items 12 thru 32 as an assembly (Figure 12-12). 5. Remove hoist and sling. 6. Remove and discard four seals (10) and two bearings (11). Figure 12-11. Figure 12-12. Go to Sheet 3 12-15

Privacy Statement
Press Release
Contact