TM 5-3805-261-34Figure 12-7.Figure 12-6.Go to Sheet 312-9EARTHMOVING EQUIPMENT COMPONENTS MAINTENANCE12-3. BladeLiftBarAssembly. (Sheet 2 of 6)REMOVALWARNINGUse adequate hoist and slingfor lifting. Failure tofollow this procedure maycause INJURY. If youareinjured, seek medical aidimmediately.1.Attach hoist and sling to center-shift cylinder.2.Remove two bolts (1), lockwashers(2), cap (3), shim(s) (4 and 5),inserts (6 and 7) and shim(s) (8and 9). Move centershiftcylinder clear of blade lift bar(34, Figure 12-6).3.Remove bolt (10), lockwasher (11)and clip (12) from items 27 thru34 as an assembly (Figure 12-7)and move hoses to one side.WARNINGWeight of blade lift bar isapproximately 200 lbs. Useadequate hoist and sling forlifting. Failure to followthis procedure may causeINJURY. If you are injured,seek medical aid immediately.4.Attach hoist and sling to items27 thru 34 as an assembly.5.Remove two bolts (13), washers(14) and lock (15) from left sideof blade lift arm.6.Remove pin (16) and two washers(17, 18 and 19).
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
