TM 5-3805-261-34
HYDRAULIC SYSTEM MAINTENANCE.
10-15.
Centershift Cylinder. (Sheet 5 of 6)
INSTALLATION
9
. Install one of two inserts (13),
shim(s) (12), cap (11), two
lockwashers (10) and bolts (9).
Tighten two bolts (9).
10.
Remove hoist and sling.
11.
Install two fittings (8).
12.
sing clean grease, lubricate two
fittings (8). Make sure greased
fittings (8) are not blocked.
13.
Install new preformed packing (7)
and connector (6, Figure 10-121).
14.
Install elbow (5) on connector
(6).
15.
Connect hose assembly (4) to
elbow (5).
16.
Install new preformed packing (3)
and connector (2).
17.
Connect hose assembly (1).
18.
Connect battery negative ground.
Refer to TM 5-3805-261-20.
Figure 10-121.
Go to Sheet 6
10-89