TM 5-3805-261-34
HYDRAULIC SYSTEM MAINTENANCE.
10-10.
Hydraulic Control Valves. (Sheet 7 of 11)
ASSEMBLY
3.
Install items 54 and 53 as an
assembly in body (55, Figure
10-87).
4.
Install spool (52).
5.
Install new preformed packing
(51) and two new preformed
packings (50) in cover (49).
6.
Install cover (49) and four bolts
(48 and 47).
7.
Install new preformed packing
(46) and plug (45).
Quantity
Quantity
Valve Assembly
Shims (42)
Spacers (43)
Scarifier
5
4
Blade lift, R.H.
5
4
Wheel lean
6
3
Centershift
6
3
Articulation
2
4
Blade tip
5
3
Circle drive
1
3
Side shift
5
4
Blade lift, L.H.
5
4
8.
Install new preformed packing
(44), spacers (43), shim(s) (42)
and spring (41) on plug (40,
Figure 10-86). Install correct
quantities of shim(s) and
spacers. Refer to chart.
9.
Install items 44 thru 40 as an
assembly (Figure 10-89) and
tighten to 35 ft-lb torque.
Figure 10-89
Go to Sheet 8
Figure 10-86.
Figure 10-89.
10-63