TM 5-3805-261-34
HYDRAULIC SYSTEM MAINTENANCE. (cont)
10-10.
Hydraulic Control Valves. (Sheet 8 of 11)
ASSEMBLY (cont)
10.
Install new preformed packing
(39) on seat (38, Figure 10-90).
11.
Lubricate outer diameter of
preformed packing (39) lightly
with clean oil. Screen in seat
must be clean before installing.
12.
Install items 39 and 38 as an
assembly (Figure 10-91). Tighten
to 12 ft-lb torque.
13.
Install new preformed packing
(35) on plug (34, Figure 10-92).
14.
Install ball (37), spring (36)
and items 35 and 34 as an
assembly (Figure 10-93).
15.
Install two new preformed
packings (33) and plugs (32).
16.
Install two retainers (30) and
spring (29). Position two
retainers (30) together on stem
(31, Figure 10-82) and slide
spring (29) over two retainers
(30).
17.
Compress spring (29).
18.
Install two retainers (28).
19.
Release spring (29).
Go to Sheet 9
Figure 10-90.
Figure 10-91.
Figure 10-92.
Figure 10-93.
Figure 10-82.
10-64
