TM 5-3805-261-34
HYDRAULIC SYSTEM MAINTENANCE.
10-10.
Hydraulic Control Valves. (Sheet 3 of 11)
DISASSEMBLY
Do not lay machined surfaces
of manifolds or valves on
unprotected surface.
Scratches or nicks will cause
destruction of parts.
5.
Separate manifolds (7 and 8) and
items 13 thru 55 as an assembly.
6.
Remove and discard six preformed
packings (9) and preformed
packings (10 thru 12).
7.
Remove two bolts (13) and washers
(14, Figure 10-79).
8.
Separate items 16 thru 23 as an
assembly from items 24 thru 55 as
an assembly.
9.
Remove and discard preformed
packing (15).
10.
Remove boot (16, Figure 10-80).
11.
Remove nut (17) and screw (18).
12.
Using suitable driver and press,
remove two bearings (19),
preformed packing (20), ring (21)
and lever (22) from housing (23).
Do not strike lever (22) to drive
two bearings (19) from housing
(23). Separate and discard pre-
formed packing (20).
Go to Sheet 4
CAUTION
Figure 10-80.
Figure 10-79.
10-59