TM 5-3805-261-34
STEERING MAINTENANCE.
8-4.
Steering Control Pump. (Sheet 5 of 5)
ASSEMBLY
8.
Install new preformed packing (16), spacer (15),
drive (14), new preformed packing (13), inner
gear (12), spacer (11) and gerotor (10, Figure 8-6).
9.
Install new preformed packing (9), cap (8) and
seven bolts (7). Tighten seven bolts (7, Figure
8-11) initially to 10 ft-lb torque in the order
shown. Then tighten to 21 ft-lb torque.
10.
Install shaft (5), bearing (4) and snap rings (3
and 2) into housing (6, Figure 8-5).
11.
Install items 6 thru 2 as an assembly and four bolts
(1, Figure 8-4) on control pump.
NOTE
Return 130G Grader to original
equipment condition.
End of Task
Figure 8-5.
Figure 8-4.
8-11
Figure 8-11.
Figure 8-6.