TM 5-3805-261-34
STEERING MAINTENANCE.
8-4.
Steering Control Pump. (Sheet 3 of 5)
DISASSEMBLY
6.
Remove pin (20), sleeve (21), spool (22) and six
springs (23, Figure 8-8).
7.
Remove snap ring (24), items 33 thru 35 as an
assembly and preformed packing (25) from pump
body (32, Figure 8-9). Discard preformed packing (25).
NOTE
It is necessary to use a small threaded
screw for removal of the seat.
8.
Remove screw (26), seat (27), preformed packings
(28 and 29), ball (30) and retainer (31) from pump
body (32). Discard preformed packings (27 and 29).
9.
Remove seals (33 and 34) from bushing (35, Figure
8-10). Discard seals (33 and 34).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
ASSEMBLY
1.Install new seals (34 and 33) on bushing (35),
Figure 8-10).
Go to Sheet 4
8-9
Figure 8-10.
Figure 8-9.
Figure 8-8.
