TM 5-3805-261-34
STEERING MAINTENANCE. (cont)
8-4.
Steering Control Pump. (Sheet 2 of 5)
DISASSEMBLY
1.
Remove four bolts (1) and items 2 thru 6 as an
assembly (Figure 8-4) from control pump.
2.
Remove snap rings (2 and 3), bearing (4) and
shaft (5) from housing (6, Figure 8-5).
3.
Remove seven bolts (7), cap (8) and preformed
packing (9) from items 17 thru 35 as an assembly
(Figure 8-6). Discard preformed packing (9).
4.
Remove gerotor (10), spacer (11), inner gear (12),
preformed packing (13), drive (14), spacer (15) and
preformed packing (16). Discard preformed packings
(13 and 16).
5.
Remove items 20 thru 23 as an assembly, race (17),
bearing (18) and race (19) from items 24 thru 35 as
an assembly (Figure 8-7).
Go to Sheet 3
8-8
7
Figure 8-6.
Figure 8-7.
Figure 8-5.
Figure 8-4.
