TM 5-3805-261-34
REAR AXLE MAINTENANCE.
5-25.
Tandem Drive Chain Assembly. (Sheet 3 of 4)
REMOVAL
8.
Turn wheel spindle counterclock-
wise while pulling chain (16,
Figure 5-148) out of tandem
housing.
9.
Remove chain (16). Weight of
chain is 50 lbs.
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter
2.
INSTALLATION
NOTE
Master link should be
installed with the bar inward
toward the other chain. Make
sure that the master links of
the two chains are not side
by side on the same tooth of
the drive sprocket.
1.
Position chain (16, Figure 5-147)
on the drive sprocket and the
wheel spindle sprocket with ends
of the chain at the openings.
2.
Install ratchet assembly on chain
(16).
3.
Position link (15) in ends of
chain (16).
Go to Sheet 4
5-119
Figure 5-148.
