TM 5-3805-261-34
REAR AXLE MAINTENANCE.
5-24.
Tandem Drive Housing Assembly. (Sheet 3 of 4)
REMOVAL
2.
Remove 18 nuts (1), washers (2)
and items 4 thru 6 as an assembly
(Figure 5-144).
3.
Remove and discard preformed
packing (3).
DISASSEMBLY
1.
Remove 12 studs (4, Figure 5-145)
from outside of tandem drive
housing (6).
2.
Remove 15 studs (5) from inside
of tandem drive housing (6).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter
2.
ASSEMBLY
1.
Apply thread sealant to 15 studs
(5, Figure 5-145) on inside of
tandem drive housing (6) and
install.
2.
Apply thread sealant to 12 studs
(4) on outside of tandem drive
housing (6) and install.
Go to Sheet 4
Figure 5-144.
Figure 5-145.
5-115
