TM 5-3805-261-34
TRANSMISSION MAINTENANCE.
5-8.
Engine to Transmission Adapter. (Sheet 2 of 3)
REMOVAL
1.
Remove plug (1) and gasket (2,
Figure 5-34) from transmission
(12). Discard gasket (2).
Remove all gasket material from
mounting surfaces.
2.
Remove and discard preformed
packing (3).
WARNING
Weight of housing is
approximately 84 pounds. Use
adequate hoist and sling for
lifting. Failure to follow
this procedure may cause
INJURY. If you are injured,
seek medical aid immediately.
3.
Install two 3/8 inch-16-2B THD
eye bolts in holes at top of
housing (6, Figure 5-35).
4.
Attach hoist and sling to housing
(6, Figure 5-36) and take up
slack.
5.
Remove 12 bolts (4) and
lockwashers (5).
6.
Remove housing (6) from
transmission (12).
7.
Remove hoist and sling.
8.
Remove and discard preformed
packing (7).
9.
Support coupling (10).
10. Remove bolt (8), retainer (9) and
coupling (10) from transmission
(12, Figure 5-37) input shaft.
11. Remove and discard preformed
packing (11).
Go to Sheet 3
5-33
Figure 5-34.
Figure 5-35.
Figure 5-36.
Figure 5-37.