TM 5-3805-261-34
TRANSMISSION MAINTENANCE. (cont)
5-6.
Transmission and Engine To Transmission Adapter. (Sheet 4 of 4)
INSPECTION
Inspect all parts. Refer to Chapter
2.
INSTALLATION
NOTE
Elevate two rear wheels,
right or left.
1.
Attach hoist and chains to two
lifting eyes on transmission (5,
Figure 5-30).
2.
Using hoist and chains, install
transmission and adapter in
vehicle. Fit transmission
splines in transmission into
splines in differential. If the
splines do not line up, turn
elevated wheel until the two
splines are in line.
3.
Rotate oil pump shaft to aline
splines of transmission adapter
gear to engine flywheel.
4.
Install 11 washers (4) and nuts
(3) over studs between
transmission (5, Figure 5-29) and
differential housing.
5.
Install 12 washers (2) and bolts
(1, Figure 5-28) between adapter
and flywheel housing.
6.
Remove hoist and chains from
lifting eyes.
NOTE
Return 13OG Grader to
original equipment condition.
End of Task
5-28
Figure 5-30.
Figure 5-29.
Figure 5-28.
