TM 5-3805-261-34
TRANSMISSION MAINTENANCE. (cont)
5-8.
Engine to Transmission Adapter. (Sheet 3 of 3)
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter
2.
INSTALLATION
1.
Position new preformed packing
(11) on transmission (12, Figure
5-37) input shaft.
2.
Position coupling (10).
3.
Install retainer (9) and bolt
(8). Tighten bolt (8) to 85
ft-lb torque.
4.
Install new preformed packing (7)
on groove of transmission (12).
5.
Using hoist and sling, install
housing (6, Figure 5-36) on
transmission (12).
6.
Install 12 lockwashers (5) and
bolts (4).
7.
Remove hoist and sling.
8.
Remove two 3/8 inch-16-2B THD
eyebolts (Figure 5-35).
9.
Install new preformed packing (3,
Figure 5-34) and lubricate with
lubricating oil.
10. Install new gasket (2) with seam
facing housing (6) and plug (1)
in transmission (12).
NOTE
Return 13OG Grader to
original equipment condition.
End of Task
5-34
Figure 5-34.
Figure 5-36.
Figure 5-35.
Figure 5-37.
