TM 5-3805-261-34
TRANSMISSION MAINTENANCE.
5-7.
Transmission Oil Lines. (Sheet 3 of 3)
INSPECTION
Inspect all parts. Refer to Chapter
2.
INSTALLATION
1.
Install two new preformed
packings (11) and elbows (10,
Figure 5-33) on rear, left side
of transmission.
2.
Connect hose assemblies (9 and 8)
to two elbows (10).
3.
Position two new preformed
packings (7) and connect hose
assemblies (9 and 8, Figure 5-32)
onto transmission oil cooler.
4.
Install four washers (6) and
bolts (5).
5.
Install spacer (4), clamp (3),
lockwasher (2) and bolt (1,
Figure 5-31).
6.
Refill transmission to proper
level. Refer to LO 5-3805-261-
12.
7.
Start engine. Refer to TM 5-
3805-261-10.
8.
Check for leaks in tube and hose
assemblies.
9.
Stop engine.
NOTE
Return 130G Grader to
original equipment condition.
End of Task
5-31
