TM 5-3805-261-34
TRANSMISSION AINTENANCE. (cont)
5-7.
Transmission Oil Lines. (Sheet 2 of 3)
REMOVAL
1.
Remove bolt (1), lockwasher (2),
clamp (3) and spacer (4, Figure
5-31) from left side of engine to
transmission adapter.
2.
Remove four bolts (5) and washers
(6, Figure 5-32).
NOTE
All hose and tube assemblies
must be tagged before
disconnecting to aid in
installation. Cap all hose
and tube ends to prevent
contamination.
3.
Disconnect hose assemblies (8 and
9) from transmission oil cooler.
4.
Remove and discard two preformed
packings (7).
5.
Remove hose assemblies (8 and 9,
Figure 5-33).
6.
Remove two elbows (10) and
preformed packings (11). Discard
two preformed packings (11).
CLEANING
Clean all parts. Refer to Chapter 2.
Go to Sheet 3
5-30
Figure 5-31.
Figure 5-32.
Figure 5-33.
