TM 5-3805-261-34
TRANSMISSION MAINTENANCE.
5-6.
Transmission and Engine To Transmission Adapter. (Sheet 3 of 4)
REMOVAL
1.
Attach hoist and chains to two
lifting eyes (Figure 5-28) on
transmission.
2.
Remove 12 bolts (1) and washers
(2) between adapter and flywheel
housing.
3.
Remove 11 nuts (3) and washers
(4) between transmission (5,
Figure 5-29) and differential
housing.
WARNING
Weight of transmission is
approximately 1500 lbs. Use
adequate hoist and chains for
lifting. Failure to follow
this procedure may cause
INJURY. If you are injured,
seek medical aid immediately.
4.
Using hoist and chains, remove
transmission and adapter (Figure
5-30) from vehicle.
5.
Remove hoist and chains from two
lifting eyes.
CLEANING
Clean all parts. Refer to Chapter 2.
Go to Sheet 4
5-27
Figure 5-28.
Figure 5-29.
Figure 5-30.
