TM 5-3805-261-34
STARTING SYSTEM MAINTENANCE. (cont)
4-11.
Starting Motor (Prestolite). (Sheet 3 of 9)
DISASSEMBLY (cont)
9.
Remove two plugs (19) and pin
(20, Figure 4-63).
10.
Remove bolt (21) and preformed
packings (22 and 23). Discard
preformed packings (22 and 23).
11.
Remove bearing (24).
NOTE
Head and housing must be
matchmarked before separation
to aid in assembly.
12.
Using scriber, matchmark head
(26) and housing (36).
13.
Remove three bolts (25).
14.
Remove head (26) from items 27
thru 36 as an assembly.
15.
Remove washer (27, Figure 4-64).
16.
Remove and discard preformed
packing (28).
17.
Remove yoke (29), drive (30) and
washer (31).
18.
Remove plug (32), wick (33) and
plug (34).
19.
Using brass driver and hammer,
remove bearing (35).
20.
Remove armature (37), washers (38
and 39) and two washers (40,
Figure 4-65).
21.
Remove spacer (41) and washer
(42).
22.
Remove items 43 thru 47 as an
assembly.
Go to Sheet 4
4-58
Figure 4-63.
Figure 4-64.
Figure 4-65.
