TM 5-3805-261-34
STARTING SYSTEM MAINTENANCE. (cont)
4-10.
Starting Motor Solenoid (Prestolite). (Sheet 3 of 4)
DISASSEMBLY (cont)
13.
Remove nut (22), washer (23),
contact assembly (24), spring
(25) and retainer (26, Figure
4-60).
14.
Using retaining ring pliers,
remove ring (27) from core (28).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter
2.
ASSEMBLY
1.
Install ring (27) on core (28,
Figure 4-60).
2.
Install retainer (26), spring
(25), contact assembly (24),
washer (23) and nut (22).
3.
Install items 28 thru 21 as an
assembly in housing (20, Figure
4-59).
4.
Position washer (19).
5.
Lubricate inside of boot (18)
with clean engine oil and install
boot (18) on housing (20).
6.
Install retainer (17), spring
(16) and retainer (15).
7.
Using retaining ring pliers,
install ring (14).
8.
Install new gasket (13) on studs
of housing (20).
Go to Sheet 4
4-54
Figure 4-60.
Figure 4-59.
