TM 5-3805-261-34
STARTING SYSTEM MAINTENANCE.
4-10. Starting Motor Solenoid (Prestolite). (Sheet 2 of 4)
DISASSEMBLY
1.
Remove four nuts (1, Figure
4-57).
2.
Carefully pull items 4 thru 12 as
an assembly outward for access to
screw (2).
3.
Remove screw (2).
NOTE
All wire, cable and harness
assemblies must be tagged
before disconnecting to aid
in installation.
4.
Disconnect wire assembly (3) at
terminal.
5.
Remove items 4 thru 12 as an
assembly from housing (20).
6.
Remove two nuts (4), washers (5),
lockwashers (6), washers (7) and
spacers (8, Figure 4-58).
7.
Remove two studs (9), terminal
(10) and insulator (11) from
cover (12).
8.
Remove and discard gasket (13)
from housing (20, Figure 4-59).
Remove all gasket material from
mounting surfaces.
9.
Using retaining ring pliers,
remove ring (14).
1
10.
Remove retainer (15), spring (16)
and retainer (17).
11.
Remove boot (18) and washer (19).
12.
Remove items 21 thru 28 as an
assembly from housing (20).
Figure 4-59.
Go to Sheet 3
4-53
Figure 4-57.
Figure 4-58.