TM 5-3805-261-34
STARTING SYSTEM MAINTENANCE. (cont)
4-9.
Starting Motor (Delco-Remy). (Sheet 10 of 15)
ASSEMBLY
1.
Position insulation bushing (65)
and insulation (64) inside
housing (66, Figure 4-47).
2.
Install field coil (63) and
position four pole shoes (62)
inside housing (66).
3.
Coat threads of eight pole shoe
screws (61) with thread sealant
and install.
4.
Install two washers (60). washer
(59) and nut (58).
5.
Using suitable driver and press,
install new bushing (56), if
removed, in housing (57, Figure
4-46).
6.
Saturate wick (55) with clean
engine oil. Install wick (55)
and new cup (54).
1
7.
Install new seal (53).
8.
Coat new preformed packing (52)
with general purpose grease and
install on housing (57).
9.
Install housing (57) on housing
(66).
10.
Install five bolts (51).
Figure 4-46.
Go to Sheet 11
4-46
Figure 4-47.
