TM 5-3805-261-34
STARTING SYSTEM MAINTENANCE.
4-9.
Starting Motor (Delco-Remy). (Sheet 5 of 15)
DISASSEMBLY
20.
Remove washer (35) from shaft of
armature (46, Figure 4-44).
21.
Remove screw (36) and five screws
(37) from housing (42).
22.
Separate housing (42) from
housing (57).
23.
Remove and discard preformed
packing (38).
24.
Drill hole in cup (39) and pry
out of housing (42). Discard cup
(39).
25.
Remove wick (40).
NOTE
Removal of bushing from
housing will cause destruc-
tion of bushing. Remove
bushing only if inspection
indicates replacement is
necessary.
26.
Inspect bushing (41) and if
necessary, using a suitable
driver and press, remove bushing
(41) from housing (42).
27.
Remove snap ring (43), shaft (44)
and two preformed packings (45)
from housing (57, Figure 4-45).
Discard two preformed packings
(45).
28.
Remove armature (46) and spacer
(47).
29.
Remove drive (48) and lever (49)
from housing (57).
30.
Remove washer (50).
Figure 4-45.
Go to Sheet 6
4-41
Figure 4-44.