FUEL SYSTEM MAINTENANCE. (cont) - TM-5-3805-261-34

FUEL SYSTEM MAINTENANCE. (cont) - TM-5-3805-261-34_233

FUEL SYSTEM MAINTENANCE. (cont) - TM-5-3805-261-34_235

TM-5-3805-261-34 Grader Heavy Road Motorized (Caterpillar Model 130 G) Manual
Page Navigation
189

TM 5-3805-261-34 FUEL SYSTEM MAINTENANCE. (cont) 3-29. Fuel Transfer Pump. (Sheet 2 of 7) REMOVAL 1. Turn fuel valve on lower right, front of fuel tank counterclock- wise to close (Figure 3-141). 2. Open bleed valve on fuel injection pump to relieve fuel pressure and close (Figure 3-142). 3. Loosen bolt (34). NOTE All hose and tube assemblies must be tagged before disconnecting to aid in installation. Cap all hose and tube ends to prevent contamination. 4. Disconnect tube assembly (1) from elbows (2 and 35). 5. Remove elbow (2) and preformed packing (3). Discard preformed packing (3). 6. Disconnect hose assembly (4). 7. Remove elbow (5) and preformed packing (6). Discard preformed packing (6). 8. Remove one of two bolts (7) and clip (8). 9. Install one of two bolts (7). 10. Remove bolt (9) and washer (10). 11. Remove bolt (11) and washer (12). 12. Remove items 13 thru 33 as an assembly from fuel injection pump. Go to Sheet 3 Figure 3-141. Figure 3-142 3-162

Privacy Statement
Press Release
Contact