TM 5-3805-261-34
FUEL SYSTEM MAINTENANCE.
3-29.
Fuel Transfer Pump. (Sheet 7 of 7)
INSTALLATION
20.
Install washer (12), bolt (11)
and two bolts (7, Figure 3-142).
Tighten evenly.
21.
Install washer (10) and bolt (9).
Tighten evenly.
22.
Remove one of two bolts (7).
23.
Install clip (8) and one of two
bolts (7) securing air bleed tube
in fuel injection pump.
24.
Install new preformed packing (6)
and elbow (5).
25.
Connect hose assembly (4).
26.
Install new preformed packing (3)
and elbow (2).
27.
Connect tube assembly (1) to
elbows (35 and 2).
28.
Tighten bolt (34).
29.
Turn fuel valve on lower, right
front of fuel tank clockwise to
open.
30.
Bleed air from fuel lines. Refer
to TM 5-3805-261-20.
NOTE
Return 130G Grader to
original equipment condition.
End of Task
Figure 3-142.
3-167
