TM 5-3805-261-34
FUEL SYSTEM MAINTENANCE. (cont)
3-29.
Fuel Transfer Pump. (Sheet 6 of 7)
INSTALLATION (cont)
9.
Install items 24 and 23 as an
assembly in housing (33, Figure
3-148).
10.
Install new preformed packing
(21) on pyramid side of valve
(20). Lubricate outer diameter
of valve (20) with clean diesel
fuel.
11.
Install items 21 and 20 as an
assembly and washer (19) in
piston (22, Figure 3-149).
12.
Install items 18 thru 15 as an
assembly (Figure 3-150).
13.
Install spring (18).
14.
Install new preformed packings
(16 and 15) in cover (14).
15.
Position valve (17) in cover
(14).
16.
Position cover (14) on housing
(33). Valve (17) must seat in
spring (18).
17.
Install two bolts (7).
18.
Install new preformed packing
(13, Figure 3-151). Lubricate
outer diameter of new preformed
packing (13) with clean diesel
fuel.
19.
Position items 33 thru 13 as an
assembly on fuel injection pump.
Insert tappet (27) and seat in
plunger inside fuel injection
pump.
Go to Sheet 7
Figure 3-148.
Figure 3-149.
Figure 3-150.
Figure 3-151.
3-166
