ENGINE MAINTENANCE. (cont) - TM-5-3805-261-34

ENGINE MAINTENANCE. (cont) - TM-5-3805-261-34_161

ENGINE MAINTENANCE. (cont) - TM-5-3805-261-34_163

TM-5-3805-261-34 Grader Heavy Road Motorized (Caterpillar Model 130 G) Manual
Page Navigation
117

TM 5-3805-261-34 ENGINE MAINTENANCE. (cont) 3-15. Oil Pan and Oil Pan Plate. (Sheet 3 of 3) CLEANING Clean all parts. Refer to Chapter 2. INSPECTION Inspect all parts. Refer to Chapter 2. INSTALLATION 1. Install plug (15) in adapter (3, Figure 3-70). 2. Install oil pump scavenger tube. Refer to paragraph 5-10, step 8. 3. Install new gasket (14), oil pan plate (13), 15 of 39 washers (8) and 15 bolts (12) to bottom of engine. Install two 3/8-16NC guide bolts into cylinder block to aid in installation. 4. Tighten oil gage bolt (11) in oil pan (9). 5. Install new gasket (10), oil pan (9), 24 of 39 washers (8), 17 bolts (7), six bolts (6) and bolt (5). Remove two 3/8-16NC guide bolts. 6. Install new gasket (4), adapter (3) and two bolts (2). 7. Install hose assembly (1). 8. Connect oil lines to left side of engine. Refer to paragraph 3-16. NOTE Return 130G Grader to original equipment condition. Figure 3-70. End of Task 3-90

Privacy Statement
Press Release
Contact