TM 5-3805-261-34ENGINE MAINTENANCE.3-15.OilPanandOilPanPlate. (Sheet 2 of 3:REMOVALNOTEAll hose and tube assemblies must betagged before disconnecting to aid ininstallation. Cap all hose and tubeends to prevent contamination.1.Disconnect oil lines on left side of engine.Refer to paragraph 3-16.2.Remove hose assembly (1, Figure 3-70) frombottom of engine.3.Remove two bolts (2), adapter (3) and gasket(4). Discard gasket (4). Remove all gasketmaterial from mounting surfaces.4.Support oil pan (9).5.Remove bolt (5), six bolts (6), 17 bolts (7) and24 of 39 washers (8).6.Remove oil pan (9) and gasket (10). Discardgasket (10). Remove all gasket material frommounting surfaces.7.Loosen oil gage bolt (11) from oil pan (9).8.Remove 15 bolts (12), 15 of 39 washers (8),oil pan plate (13) and gasket (14). Discardgasket (14). Remove all gasket material frommounting surfaces.9.Remove oil pump scavenger tube. Refer toparagraph 5-10, step 5.10. Remove drain plug (15) from adapter (3).Figure 3-70.Go to Sheet 33-89
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
