TM 5-3805-261-34
ENGINE MAINTENANCE.
3-16.
Oil Pump and Lines. (Sheet 3 of 6)
REMOVAL
10. Remove bolt (14) and washer (15).
11. Using suitable puller, remove gear (16).
12. Remove key (17) from oil pump (18) shaft.
13. Remove oil pan plate from bottom of engine.
Refer to paragraph 3-15.
14. Remove items 19 thru 23 as an assembly.
15. Separate elbow (19) from items 20 thru 23 as
an assembly (Figure 3-73).
16. Remove and discard preformed packing (20)
from tube assembly (23).
NOTE
All hose and tube assemblies must be
tagged before disconnecting to aid in
installation. Cap all hose and tube ends
to prevent contamination.
17. Remove bolt (21), lock (22) and tube assembly
(23) from oil pan plate.
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
Figure 3-73.
Figure 3-72.
Go to Sheet 4
3-93