TM 5-3805-261-23-2
OIL PUMP AND LINES REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
Maintenance Level
Materials/Parts - Continued
Ring seal
Direct Support
References
Tools and Special Tools
WP 0020 00
Tool kit, general mechanic's (Item 89, WP 0348 00)
WP 0234 00
Shop equipment, field maintenance (Item 74, WP
0348 00)
Equipment Conditions
Wrench, torque (Item 96, WP 0348 00)
Machine parked on level ground (TM 5-3805-261-
10)
3/8-16NC 1-1/2 in. bolt (2)
Parking/emergency brake applied (TM 5-3805-261-
Materials/Parts
10)
Cap set, protective (Item 7, WP 0349 00)
Implements lowered to ground (TM 5-3805-261-
Lubricating oil (Item 26, 27, or 30, WP 0349 00)
10)
Rag, wiping (Item 35, WP 0349 00)
Engine off (TM 5-3805-261-10)
Tag, marker (Item 44, WP 0349 00)
Battery disconnect switch in OFF position (TM 5-
Bearing
3805-261-10)
Gasket (2)
Oil pan removed (WP 0275 00)
REMOVAL
1.
Remove bolts (4 and 5) from oil pump assembly (1).
2.
Support oil pump assembly (1).
3.
Remove two bolts (8), locks (9), bolts (3), and washers (2).
4.
Remove oil pump assembly (1) and gasket (7) from elbow (6).
5.
Remove gasket (7) from oil pump assembly (1). Discard gasket.
1
2
3
9
8
7
4
6
5
397-1331