TM 5-3805-261-23-2
OIL PUMP AND LINES REPLACEMENT - CONTINUED
0276 00
REMOVAL - CONTINUED
6.
Remove two bolts (15), lock (14), bell (16), and gasket (13) from oil pump (12). Discard gasket.
NOTE
Matchmark each gear to the other gear to aid in installation.
7.
Use puller to remove gear (10).
CAUTION
Removal of bearing from gear will cause destruction of bearing. Remove bearing only if inspection indicates
replacement is necessary.
8.
Inspect bearing (11). Replace if cracked, broken, distorted, grooved, or scored.
9.
Use driver and press to remove bearing (11) if necessary.
10.
Remove bolt (23) and washer (22).
11.
Use puller to remove gear (21).
12.
Remove key (24) from oil pump shaft (20).
13.
Remove oil pan plate from bottom of engine (WP 0275 00).
14.
Remove bolt (17), lock (18), and scavenger elbow with scavenger tube (19) from oil pan plate.
CAUTION
Cap tube ends to prevent contamination.
15.
Remove elbow with tube (19) as an assembly, from oil pan plate.
10
11
12
24
23
13
14
15
22
21
16
20
17
18
19
397-2222
0276 00-2