TM 5-3805-261-23-1
BLADE (MOLDBOARD) ASSEMBLY REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
Maintenance Level
Personnel Required
Two
Unit
References
Tools and Special Tools
Tool kit, general mechanic's (Item 89, WP 0348 00)
Shop equipment, common no. 1 (Item 75, WP 0348
Equipment Conditions
Machine parked on level ground (TM 5-3805-261-
Bracket, link (2) (Item 17, WP 0348 00)
10)
Sling (Item 78, WP 0348 00)
Parking/emergency brake applied (TM 5-3805-261-
10)
Chain
Implements lowered to ground (TM 5-3805-261-
Lifting device, 1,500-lb capacity
10)
Wood blocks
Engine off (TM 5-3805-261-10)
Materials/Parts
Battery disconnect switch in OFF position (TM 5-
Rag, wiping (Item 35, WP 0349 00)
3805-261-10)
Blade tip cylinder disconnected (WP 0334 00)
Pin, cotter
REMOVAL
1.
Move blade assembly (2) as far to right as possible and lower until just off ground.
2.
Remove cotter pin (1) and pin (3). Discard cotter pin.
2
1
3
397-1669
