TM 5-3805-261-23-1
BLADE (MOLDBOARD) ASSEMBLY REPLACEMENT - CONTINUED
0259 00
INSTALLATION - CONTINUED
8.
Operate blade sideshift control and extend cylinder
rod (19) to align with bracket (18) on blade assembly
(2).
9.
Install pin (3) and new cotter pin (1).
10.
Operate blade sideshift control to retract cylinder rod
SLING
(19) and blade assembly (2) into place.
11.
Remove remaining side of sling and second of two
link brackets from blade assembly (2).
LINK
BRACKETS
19
18
2
1
3
397-1673
NOTE
Shims are installed between strip and blade bracket. Add or remove shim(s) as required to get a minimum of
0.125 in. (3.2 mm) gap between blade rail and strip.
MUST BE
MORE THAN
1/8 IN. GAP
(3.2 MM)
397-1049
0259 00-5
