TM 5-3805-261-23-1
REMOTE CONTROL REPAIR (TYPE II MACHINE) - CONTINUED
0175 00
DISASSEMBLY - CONTINUED
33
15
32
16
26
25
24
31
23
22
17
30
19 18
29
28
21
27
397-2358
20
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0020 00.
ASSEMBLY
1.
Install low air warning lamp (16) on cover (15) and connect wires (31 and 32).
2.
Install differential lock switch (18) on cover (15) and connect wires (27, 28, 29, and 30).
3.
Install steering valve (23) on cover (15) with nuts (22 and 24). Connect tube ends (25, 26, and 33) and wire (21).
4.
Install new preformed packings (6, 8, 10, and 12) and elbows (5, 7, 9, and 11) on remote control unit (13).
5.
Install line fitting on elbows inside remote control unit (13).
6.
Connect wiring harness (14) at fitting and connect wiring inside remote control unit (13).
7.
Install cover (15).
8.
Connect hoses (1, 2, 3, and 4) to elbows (5, 7, 9, and 11).
9.
Install cable assemblies (17, 19, and 20) and tighten jamnuts.
END OF WORK PACKAGE
0175 00-3
