TM 5-3805-261-23-1
STEERING CYLINDER REPLACEMENT - CONTINUED
0176 00
REMOVAL - CONTINUED
14
5.
Remove cotter pin (17), nut (18), and washer (19).
15
Discard cotter pin.
16
6.
Remove steering cylinder assembly (16) from axle
bracket (20) from wheel spindle housing (23) by pry-
17
ing or pulling.
18
7.
Remove spacer (14), bearing (15), spacer (21), and
22
ring (22).
19
21
20
23
397-4326
NOTE
Before removing socket and nut, measure and record the amount of exposed threads on the threaded rod to
aid in installation.
8.
Loosen nut (24) while holding hex (25) end of rod.
9.
Remove socket (27) and nut (24) by unscrewing from
cylinder assembly (16).
25
24
16
397-4327
27
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0020 00.
0176 00-3