TM 5-3805-261-23-1
STEERING CYLINDER REPLACEMENT - CONTINUED
0176 00
INSTALLATION
1.
Install nut (24) and socket (27) on cylinder (16).
Screw socket and nut into cylinder with the same
amount of threads exposed as recorded in removal.
25
24
2.
Tighten nut (24) while holding hex (25) end of cylin-
der shaft.
16
27
397-4327
3.
Install ring (22), spacer (21), bearing (15), and spacer
14
15
(14) on cylinder assembly (16).
16
4.
Install steering cylinder assembly (16) on axle bracket
(20) and wheel spindle housing (23).
17
5.
Install washer (19), nut (18), and new cotter pin (17).
18
Tighten nut to 103 lb-ft (140 Nm).
22
19
21
20
23
397-4326
1
6.
Install new preformed packing (8), new O-ring (6),
2
3
and connector (7) to cylinder fitting (9).
7.
Install new preformed packing (4), new O-ring (2),
4
and elbow (3).
12
8.
Connect hose assemblies (1 and 5).
13
11
9.
Install pin (10), clip (11), washer (13), and bolt (12).
5678
10
397-2285
9
0176 00-4
