TM 5-3805-261-23-1
SUPPLEMENTAL STEERING CHECK VALVE REPLACEMENT - CONTINUED
0174 00
INSTALLATION
1.
Holding body (14), connect hose assemblies (11 and 12), and install new O-rings (13) so that adapter end of valve faces
forward on machine.
2.
Install plate (3), washer (5), bolt (4), bracket (6), clip (7), washers (9 and 10), and nut (8) so that clip hooks over bracket.
3.
Install three washers (1) and bolts (2).
1
2
397-53
397-536
4.
Turn battery disconnect switch to ON position and start engine (TM 5-3805-261-10).
5.
Turn engine off.
6.
Check for leaks.
7.
Refill hydraulic tank to proper level (WP 0216 00).
END OF WORK PACKAGE
0174 00-3
