TM 5-3805-261-23-1
AIR BRAKE LINES REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
Maintenance Level
Equipment Conditions
Unit
Machine parked on level ground (TM 5-3805-261-
10)
Tools and Special Tools
Tool kit, general mechanic's (Item 89, WP 0348 00)
Parking/emergency brake applied (TM 5-3805-261-
10)
Materials/Parts
Implements lowered to ground (TM 5-3805-261-
Cap set, protective (Item 7, WP 0349 00)
10)
Rag, wiping (Item 35, WP 0349 00)
Engine off (TM 5-3805-261-10)
Tag, marker (Item 44, WP 0349 00)
Battery disconnect switch in OFF position (TM 5-
References
3805-261-10)
WP 0315 00
Air pressure relieved (TM 5-3805-261-10)
REMOVAL
WARNING
Do not disconnect air line from release valve until air pressure is zero. All air must be bled from air
tanks. Failure to follow this warning may cause injury to personnel.
Compressed air must not exceed 30 psi (207 kPa). DO NOT direct compressed air against human skin.
Make sure air stream is directed away from user and other personnel in the area. Wear protective gog-
gles or face shield. Failure to follow this warning may cause injury to personnel.
CAUTION
Cap hose ends and plug open ports to prevent contamination.
NOTE
Tag hose and tube assemblies before disconnecting to aid in installation.
This procedure covers replacement of the right side air brake lines. Follow these instructions for the left
side air brake lines.
