TM 5-3805-261-23-1
AIR BRAKE PEDAL AND LINKAGE MAINTENANCE - CONTINUED
0160 00
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0020 00.
INSTALLATION
1.
Install two roller bearings (21) and washers (20).
2.
Install roller (23), pin (24), and new cotter pin (22).
3.
Install pedal (11), shaft (18), and new cotter pin (17) on bracket (8).
4.
Connect governor control linkage (WP 0282 00).
5.
Install nut (10), bolt (13), and nut (12).
6.
Install nut (16), bolt (15), nut (9), and spring (14).
4
3
7.
Install nut (6) and setscrew (7) on right side of cab
2
floor.
1
5
8.
Install boot (5), washer (4), tread (1), two washers (2),
7
and bolts (3).
6
397-4257
0160 00-3
