TM 5-3805-261-23-1
AIR BRAKE LINES REPLACEMENT - CONTINUED
0161 00
REMOVAL - CONTINUED
24.
Remove bolt (61), washer (60), and clip (59).
25.
Disconnect hose assembly (52) from release valve assembly (58).
26.
Remove hose assembly (52) from connector (62).
27.
Remove check valve (53) and nipple (54).
28.
Remove hose assembly (51).
29.
Remove elbow (65) and solenoid valve (64).
30.
Remove nipple (63).
31.
Remove tee (55), check valve (56), elbow (57), and connector (62).
58
56
53
57
54
55
52
62
51
59
61
60
64 63
397-4266
65
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0020 00.
INSTALLATION
NOTE
Steps 1 through 14 are for the installation of the lines from the right side of the air reservoir to the air brake
valve. Follow these instructions for installation of the lines on the left side of the air reservoir.
1.
Install connector (62), elbow (57), check valve (56), and tee (55).
2.
Install nipple (63).
3.
Install solenoid valve (64) and elbow (65).
4.
Install hose assembly (51).
5.
Install nipple (54) and check valve (53).
6.
Install hose assembly (52) to connector (62).
7.
Connect hose assembly (52) to release valve assembly (58).
8.
Install clip (59), washer (60), and bolt (61).
0161 00-6
