TM 5-3805-261-23-1
AIR BRAKE LINES REPLACEMENT - CONTINUED
0161 00
REMOVAL - CONTINUED
NOTE
For Type II machines, refer to WP 0315 00
1.
Release pressure and drain air tank (1) by opening two valves (2) on two elbows (3).
2.
Remove four bolts (6) and washers (5).
3.
Remove four clips (12).
4.
Disconnect tube assemblies (11 and 4) from block (10) under engine compartment.
5.
Remove tube assemblies (11 and 4).
6.
Disconnect hose assembly (9) from block (10).
7.
Disconnect hose assembly (8) from plate (7).
8
7
1
6
5
4
9
10
3
11
12
2
397-2307
8.
Remove two nuts (21), washers (22), clip (23), and
16 17 18
plate (24) under front-right side of engine compart-
15
ment.
14
9.
Remove clamp (13).
13
10.
Remove two nuts (18), washers (17), clip (16), and
24
plate (15).
11.
Remove clamp (14).
23
12.
Remove hose assembly (19) from air brake valve (20).
22
21
19
397-426
20
397-4262
0161 00-2