TM 5-3805-261-23-1
AIR BRAKE PEDAL AND LINKAGE MAINTENANCE - CONTINUED
0160 00
REMOVAL - CONTINUED
3.
Remove spring (14), nut (9), bolt (15), and nut (16) under right side of cab floor.
4.
Remove nut (12), bolt (13), and nut (10).
5.
Disconnect governor control linkage (WP 0282 00).
6.
Remove and discard cotter pin (17) from bracket (8) and pedal (11).
7.
Drive shaft (18) towards inner frame and lubricate shaft with clean oil.
8.
Push shaft (18) toward outside of machine while assistant depresses accelerator pedal.
9.
Remove pedal (11) from bracket (8).
8
11
19
9
10
18
17
16
15
14
12
13
397-2302
10.
Remove cotter pin (22), pin (24), and roller (23) from
22
21
20
pedal (11). Discard cotter pin.
11
11.
Remove two washers (20) and roller bearings (21)
from pedal (11).
21
20
23
24
397-4259
0160 00-2
