TM 5-3805-261-23-1
BACKUP ALARM REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
Equipment Conditions
Maintenance Level
Unit
Machine parked on level ground (TM 5-3805-261-
10)
Tools and Special Tools
Parking/emergency brake applied (TM 5-3805-261-
Tool kit, general mechanic's (Item 89, WP 0348 00)
10)
Materials/Parts
Implements lowered to ground (TM 5-3805-261-
Rag, wiping (Item 35, WP 0349 00)
10)
Tag, marker (Item 44, WP 0349 00)
Engine off (TM 5-3805-261-10)
Locknut (2)
Battery cables disconnected (WP 0125 00)
References
Grille removed (WP 0054 00)
REMOVAL
NOTE
Tag wire assemblies before disconnecting to aid in installation.
1.
Disconnect two wire assemblies (6) from connectors of wiring harness on radiator.
2.
Remove two locknuts (7), washers (8), and two wire assemblies (6) from alarm (3). Discard locknuts.
3.
Inspect two lug terminals (4), wires (6), quick-disconnect terminals (5), and discard any parts that are damaged or dete-
riorated.
4.
Remove two bolts (1), washers (2), and alarm (3).
1
3
2
4
5
6
8
7
397-360
